MH SERIES
Modular Heatless Desiccant Air Dryer
The MH Series modular heatless desiccant air dryer is designed to provide maximum flexibility in compressed air systems.
Tailored to meet the rigorous demands of various applications, the MH Series offers unparalleled efficiency, reliability while covering pressure dew points from -40℃ to -70℃
Share
Introduction
The MH Series modular dryers can offer our clients the most advanced, energy-efficient compressed air systems and help them achieve optimal air quality and operational excellence.
High Quality Dry Air
Pressure dew points from -40℃ to -70℃ and corresponds to ISO 8573-1 class 1 & 2.
Energy Efficiency
The MH Series features our advanced Energy Management System (EMS) is optional and provides a low pressure drop 0.18 barg with possible purge reduction on compressed air demand (on/off load control).
Advanced Control
Several auto-alert options, Modbus-ready design, RS-485 communications equipped with MH Series. And the compressor interlock function reduces the timing of the purge cycle based on compressed air demand.
Modularity (MH5J – 25J)
MH Series can be wall-mounted or installed horizontally, with piping installation possible on left or right side. This, combined with modular design not only simplifies initial installation but also makes future expansions or modifications hassle-free.
User-Friendly
Particularly quiet operation and innovative design allows for quick installation and easy maintenance. Selected models also incorporated an easy-to-use control interface and automatic maintenance alarms, making them a user favorite.
Optional Functions
- EMS (Energy Management System)
˗ The operation of the dryer is adjusted according the outlet air Dew Point Temperature measured by a precision sensor
˗ EMS takes over compressor interlock function
˗ Interlock function is the basic standard for models of MH40 and larger
- PDP -70℃
˗ Class 1 Pressure Dew Point applications (according to ISO 8573-1-2010)
Micro-processor
(MH5J – 25J)
- Easy to use
- Compact, fit the small units
- Cycle time indication
- Display drying/regeneration of right/left tower
- Intuitive interface, simple navigation
Digital Controller
Preventive maintenance alerts
Alerts based on running hours
Maintenance alerts for:
- Filter Element Change-out
- Muffler Replacement
- Valve Replacement
- Desiccant Change-out
- Dew Point Sensor Service
(only with EMS)
Proactive maintenance for dryer reliability
and customer uptime
Connectivity
- Modbus-Ready
- RS-485 Communications:
- Easier integration into a wide variety of
DCS systems - Remote alarm
- Communicates common alarm through
Modbus
- Easier integration into a wide variety of
Compressor Interlock Function
- Reduce the timing of the purge cycle based on
compressed air demand - The controller monitors the cycle rate of the air
compressor load/unload to effectively reduce
timing of purge
(When more than one compressor is connected to
MH the on/off relay of compressor with the lowest
pressure set point, must be used)
Product Features
Introduction
The MH Series modular dryers can offer our clients the most advanced, energy-efficient compressed air systems and help them achieve optimal air quality and operational excellence.
High Quality Dry Air
Pressure dew points from -40℃ to -70℃ and corresponds to ISO 8573-1 class 1 & 2.
Energy Efficiency
The MH Series features our advanced Energy Management System (EMS) is optional and provides a low pressure drop 0.18 barg with possible purge reduction on compressed air demand (on/off load control).
Advanced Control
Several auto-alert options, Modbus-ready design, RS-485 communications equipped with MH Series. And the compressor interlock function reduces the timing of the purge cycle based on compressed air demand.
Modularity (MH5J – 25J)
MH Series can be wall-mounted or installed horizontally, with piping installation possible on left or right side. This, combined with modular design not only simplifies initial installation but also makes future expansions or modifications hassle-free.
User-Friendly
Particularly quiet operation and innovative design allows for quick installation and easy maintenance. Selected models also incorporated an easy-to-use control interface and automatic maintenance alarms, making them a user favorite.
Optional Functions
- EMS (Energy Management System)
˗ The operation of the dryer is adjusted according the outlet air Dew Point Temperature measured by a precision sensor
˗ EMS takes over compressor interlock function
˗ Interlock function is the basic standard for models of MH40 and larger
- PDP -70℃
˗ Class 1 Pressure Dew Point applications (according to ISO 8573-1-2010)
Micro-processor
(MH5J – 25J)
- Easy to use
- Compact, fit the small units
- Cycle time indication
- Display drying/regeneration of right/left tower
- Intuitive interface, simple navigation
Digital Controller
Preventive maintenance alerts
Alerts based on running hours
Maintenance alerts for:
- Filter Element Change-out
- Muffler Replacement
- Valve Replacement
- Desiccant Change-out
- Dew Point Sensor Service
(only with EMS)
Proactive maintenance for dryer reliability
and customer uptime
Connectivity
- Modbus-Ready
- RS-485 Communications:
- Easier integration into a wide variety of
DCS systems - Remote alarm
- Communicates common alarm through
Modbus
- Easier integration into a wide variety of
Compressor Interlock Function
- Reduce the timing of the purge cycle based on
compressed air demand - The controller monitors the cycle rate of the air
compressor load/unload to effectively reduce
timing of purge
(When more than one compressor is connected to
MH the on/off relay of compressor with the lowest
pressure set point, must be used)